sa285 grade a steel

sa285 grade a steel

sa285 grade a steel Related introduction

  1. The main differnence for these three carbon steel grades of SA285 Grade A,SA285 Grade B and SA285 Grade C is their yield strength and tensile strength. For pressure vessel steel plate SA285 Grade A,minimum yield strength shall be 165 Mpa and 24Ksi,and SA285 Grade B pressure vessel steel plate owned the minimum yield strength at 185 Mpa and 27 Ksi,then pressure vessel steel plate SA285 Grade C owned the highest yield among them,it shall be above 205 Mpa and 30 Ksi.So steel plate SA285 Grade C is the most common used in the industry.

    SA285 Grade A SA285 Grade B SA285 Grade C steel plate ...

    Is this answer helpful?Thanks! Give more feedbackThanks! How can it be improved?

    How can the answer be improved?

    Tell us how
  2. SA285 Grade A SA285 Grade B SA285 Grade C steel plate ...

    For pressure vessel steel plate SA285 Grade A,minimum yield strength shall be 165 Mpa and 24Ksi,and SA285 Grade B pressure vessel steel plate owned the minimum yield strength at 185 Mpa and 27 Ksi,then pressure vessel steel plate SA285 Grade C owned the highest yield among them,it shall be above 205 Mpa and 30 Ksi.So steel plate SA285 Grade C ...

  3. SA-285-Low Tensile Strength Carbon Steel Pressure Vessel ...

    sa-285 Overview Applications for low / intermediate tensile strength requirements. 285 is designed for low pressure heaters, treaters, tanks and other low pressure PVQ applications.

  4. ASME SA285 Grade C Middle or low strength carbon steel ...

    SA285 Grade C Specification: SA285 Grade C is a kind of common carbon steel, whose tensile is low or mid-low. There are three grades or levels material GR A/B/C in the standard ASME SA-285/SA-285M.

  5. ASTM A285 Grade C Middle or low strength carbon steel ...

    ASTM A285 Grade C Middle or low strength carbon steel plates Location: Join-win steel > ASTM > ... The main difference for these three carbon steel grades of SA285 Grade A,SA285 Grade B and A285 Grade C is their yield strength and tensile strength.

  6. ASME SA285 STEEL PLATE - Gangsteel

    ASME SA285Gr.A, SA285 GR.A,SA285 Grade A STEEL PLATE . Gangsteel Plant is committed to product and supply ASME SA285GR.A, SA285GR.A STEEL PLATE, SA285GR.A Mill Plate as well as the equivalent grades as per ASME, ASME, JIS , EN, UNS Specs.

  7. ASTM A285 Grade C Carbon Steel Pressure Vessel and Boiler ...

    Champak steel is a Stockholders and Suppliers of ASME SA 285 Gr C Plates, A285 Grade C Carbon Steel Plate, ASTM A285 Grade C pressure vessels Plates, SA285 Gr.C Boiler Steel Plate, A285 Grade C Welded Steel Plates

  8. SA285 Grade C | Products for Sale | Sell Metal and Steel ...

    SA285 Grade C is a kind of common carbon steel used for pressure vessel steel.SA285 Grade C is supplied throughout the oil gas and petrochemical industry.The material SA285 Grade C has good forming and welding characteristics under conventional methods.

  9. SA285-C vs SA516-70 - ASME (mechanical) Code Issues - …

    Feb 23, 2007 · Have previously used SA285 Grade C plate for the construction of miniature boilers. A quantity of SA516 Grade 70 plate has been made available to me for the construction of another miniature boiler. ... Both steel plate materials are P-No1 designation. RE: SA285-C vs SA516-70 chaulklate (Mechanical) 21 Feb 07 18:36. Although both materials are ...

    The SA 516 Grade 70 is excellent pressure vessel steel plate material to weld and fabricate. For miniature boilers, my preference would be ASME SA 515 Grade 70 because it is more suitable for elevated temperature service. Follow the preheat and post weld heat treatment requirements as defined in ASME B&PV Code, Section I. Both steel plate materials are P-No1 designation.
    1
    Although both materials are P1, they are different sub groups. The 516-70 material is G2 and the SA-285-C is G1. The lower the group number, the lower the yield stress. It will depend on what the stress value of your weld rod/wire/consumable is. If you used 65 KSI rod to qualify your 285-C weld procedures and want to use the same procedure for 516-70, you would want to derate your seams to the lower stress value. It is not common practice to use a lower yield consumable than the base metal. Check your weld procedures, your consumable should be 70 KSI or greater to use it on 516-70 or else you are looking at the material stress derate. Or else do your calculations based on the lower stress values of 285-C and use the 516-70 as a higher substitute. Or at least that's what I believe to be true.
    chaulklate; Yes, you are correct. The ultimate tensile strength for the SA 285 Grade C plate material varies from 55Ksi up to 75 Ksi. However, Section II will only credit the 55ksi for design purposes. I doubt that one would use an AWS 5.1 E6010 weld rod to qualify for a full penetration groove weld, but you never know. I would expect that the OP's WPS would have been qualified using E7018 for the SA 285 Grade C plate.
    I would also suggest SA-516 Gr70. It forms better and will not fire check as bad. Lots of times E6010 is used for tacks and roots,fill and cap with E7018. If you are joining a replacement part on to something that is old or has been in service E6010 works much better for your first layer.
    I often see E6010 used for SA285 Grade C material. I think deanc is correct that more often E6010 is used for root pass only. Strength wouldn't be an issue with SA285 C, but E6010 does tend to have lower toughness than E7018. Joe Tank
    Thank you to all respondents. Calculations will be based on 285C with 516-70 used as a higher substitute.
    jghtech Nice thought....but I would want to see calcs. for what is used. There are other considerations.
    SA-264 Maximum Allowable Working Stress - Boiler and ...Oct 29, 2012
    SA-285 Gr. C & SA-106 Gr. B, ASME 1971 editionOct 08, 2008
    See more results
  10. ASTM A283/ ASME SA283 PVQ Steel Plate | Chapel Steel

    SA283 is a structural carbon steel plate utilized for applications requiring low or intermediate tensile strength. This grade is used in the manufacture of storage tanks and low pressure, temperature controlled vessels.

  11. Standard Specification for Pressure Vessel Plates, Carbon ...

    A285 / A285M-17 Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength pressure vessels~ welded steel plates~ welded steel sheets~ welded steel

Online Consultation